Time:2026-11-16 17:15:21 Hits:
The boss who does extrusion and granulation must remember that the internal gears and bearings of the melt pump are precision parts with micrometer level matching, and it does not have a separate lubrication system.
Normal production relies entirely on high-temperature melt for lubrication and cooling, forming a protective film in the gaps between parts, separating metal contact surfaces, and taking away operating heat to stabilize measurement accuracy.

Once idling, there is no molten material in the pump chamber, and the metal parts directly experience dry friction
In just a few tens of seconds, the temperature will rapidly rise, causing gear strains, bearing erosion, and shaft holding. Precise clearances will be directly lost, and the pump will be directly damaged.
Moreover, high temperatures can cause residual materials inside the pump to carbonize, resulting in black spots and crystal clusters in subsequent production. High priced materials such as thin films and optical sheets can be scrapped in batches if accidentally discarded, causing significant losses!
2026-11-16
The boss who does extrusion and granulation must remember that the internal gear......
2026-11-11
If you run plastic extrusion lines for PP, PE or PET, unstable melt flow, pressu......
2026-11-04
Hot melt adhesive melt pump is the core metering and conveying equipment special......